Brief 2: OUGD603 Brief - Package a new range of organic Jams

Creating the sleeve. 

Using the illustrations i created a layout for where the information should go shown below, which i then printed off to see if it worked well with the bottle. 

I used some stock which i might be using but i think it is too dark but it is ok to see how it works with the bottle. 

After seeing how the information worked with the bottle i created a layout for the back of the sleeve for the information that was going on the back, this information was to have a recipe for that particular jam on the back. 

I had an idea for the sleeve to be ripped off so i designed a pattern where this could happen, the marks on the right of the image shown below will be cut away and will allow a ripping downwards. 

Then using the same layout that is on the front for consistency for the recipe and all that information

Next i started to create some circles for the top of the bottles as a colour coordinated part, so the circles will be the same as the illustrations. 

These were the original circles i created but as you can see they are really big so i have changed these and made them much smaller

Mock up 


After finalising the sleeve i printed it out back and white to see if it would work on the bottles.

The sleeve worked fine in terms of the ripping but i needed to move the type that is below it.

There was a few things i wanted to change, like making the flavour of the jam bigger and below making the small dash bigger